Beckhoff TwinCAT

The foglamp-south-beckhoff plugin is a plugin that allows collection of data from Beckhoff PLC’s using the TwinCAT 2 or TwinCAT 3 protocols. It utilises the ADS library to allow updates the the values held within the PLC to be captured in FogLAMP and sent onward as with any other data in FogLAMP.

The plugin uses a subscription model to register for changes to variables within the PLC and each of these becomes a data point in the asset that is created within FogLAMP.

To create a south service with the Beckhoff TwinCAT plugin

  • Click on South in the left hand menu bar

  • Select Beckhoff from the plugin list

  • Name your service and click Next

beckhoff_1

  • Configure the plugin

    • Asset Name: The default asset name that is used for the data that is extracted from the PLC if the map does not define an explicit asset name.

    • EtherCAT Server: The hostname or IP address of the ADS master, this is the IP address of the Beckhoff PLC.

    • Remote NetId: The Beckhoff netId of the PLC. This is normally the IP address of the PLC with .1.1 appended to it.

    • Protocol: Define if the Automatic, TwinCAT 2 or TwinCAT 3 protocol is to be used. If Automatic is chosen the plugin will attempt to determine if the PLC supports TwinCAT 2 or TwinCAT 3.

    • Source NetId: The Beckhoff AMS NetId to assign to this plugin. This may be left blank, in which case an NetId will be generated from the IP address of the machine. However in some circumstances this is not acceptable or does not work correctly. A source NetId must always be provided when running within a container.

    • TwinCAT Map: A JSON document that is the data mapping for the PLC. This defines what variables are to be extracted from the PLC. See below for details of the map format.

  • You must also authorise the FogLAMP plugin by adding an AMS route on your PLC

Adding AMS Route

Sample AMS route:

Name:

MyAdsClient

AMS Net Id:

192.168.0.1.1.1 # Derived from the IP address of your FogLAMP

Address:

192.168.0.1 # The IP address of your FogLAMP

Transport Type:

TCP/IP

Routes can be configured using one of several different methods;

TwinCAT Engineering:

Go to the tree item SYSTEM/Routes and add a static route.

TwinCAT Systray:

Open the context menue by right click the TwinCAT systray icon. (not available on Windows CE devices)

TC2:

Go to Properties/AMS Router/Remote Computers. This requires a restart of TwinCAT on your PLC

TC3:

Go to Router/Edit routes.

TcAmsRemoteMgr:

Windows CE devices can be configured locally (TC2/TC3). Tool location: /Hard Disk/System/TcAmsRemoteMgr.exe. If uses TwinCAT 2 then a restart will be required after adding the AMS Route.

IPC Diagnose:

Beckhoff IPC’s provide a web interface for diagnose and configuration. Further information: [Beckhoff Device Manager](http://infosys.beckhoff.de/content/1033/devicemanager/index.html?id=286)

Map Format

The map is a JSON document that describes the variables to be extracted from the PLC. The variables may be defined either by name or by group and index id. Each variable will become a datapoint with the asset added to FogLAMP. The map itself is a single JSON array called “items”, with each element in the array being an object that define the variable and what to do with it.

These objects have the following members within them

Key

Description

asset

An optional element that defines an asset code that should be used to store the variable. If this is not given then the default asset code for the plugin is used.

datapoint

The name of the datapoint into which the variable is stored within the asset code. The datapoint name must be given for each object in the map.

name

The variable name within the PLC that is extracted. This may be obtained either by examining the PLC code that is running or by extracted from the .TPY file for the PLC. Either name or group and index must be given for each item in the map.

group

The numeric group within the PLC from which data is extracted. This allow data to be extracted without the use of variable names. It is not recommended for production use as it is very dependent on the layout of the PLC code, using variable names is more robust than group and index.

index

The numeric index within the group from which to extract data, see above.

Example

An example TwinCAT map is should below

{
  "items": [
    {
      "datapoint": "engine",
      "name": "MAIN.engine"
    }
  ]
}

This is based on the simulation that is available from Beckhoff and creates a single data point within the default asset called engine. It is populates with the value of the internal PLC variable MAIN.engine. A new asset will be created and added to the FogLAMP buffer every time this variable changes.

Multiple items may be read from the PLC by adding an element for each to the items array. For example to extract the two variables MAIN.oilPressure and Main.engineSpeed from the PLC a map as shown below could be used.

{
  "items": [
    {
      "datapoint": "oilPressure",
      "name": "MAIN.oilPressure"
    },
    {
      "datapoint": "rpm",
      "name": "MAIN.engineSpeed"
    }
  ]
}

Testing

The easiest way to test the Beckhoff plugin is to setup a simulation on a windows machine and run the Beckhoff PLC in simulator mode. The Beckhoff PLC can be freely downloaded from the Beckhoff site.

https://beckhoff.co.uk/english/download/tc3-downloads.htm?id=1905053019883865

This is designed to be run on a Windows 7 machine.

You can then create some sample variables to try to link to.

Downloading the code from Beckhoff includes a simple example that can be run that defines an engine variable, this is the example for which the default configuration is setup for.

Note

You will need to setup a static route in the Beckhoff PLC with the AMSNetId and IP address for the plugin and the type as TCP/IP.

See Also

foglamp-south-ABB - A south plugin to pull data from the ABB cloud

foglamp-south-ModbusC - A FogLAMP south plugin that implements modbus-tcp and modbus-rtu

foglamp-south-S7 - A south plugin that uses the S7 Communications protocol to read data from a Siemens S7 series PLC.

foglamp-south-dnp3 - A south plugin for FogLAMP that implements the DNP3 protocol

foglamp-south-etherip - A south plugin to read tags data from a number of different Allen-Bradley and Rockwell PLCs.

foglamp-south-opcua - A FogLAMP south service that pulls data from an OPC-UA server

foglamp-south-s2opcua - An OPCUA south plugin based on the Safe & Secure OPCUA library. This plugin offers similar functionality to the foglamp-south-opcua plugin but also offers encryption and authentication.