Administration API Reference

This section presents the list of administrative API methods in alphabetical order.

Audit Trail

The audit trail API is used to interact with the audit trail log tables in the storage microservice. In FogLAMP, log information is stored in the system log where the microservice is hosted. All the relevant information used for auditing are instead stored inside FogLAMP and they are accessible through the Admin REST API. The API allows the reading but also the addition of extra audit logs, as if such logs are created within the system.

audit

The audit methods implement the audit trail, they are used to create and retrieve audit logs.

The set of possible audit sources are

Source	Description
PURGE	Data Purging Process
LOGGN	Logging Process
STRMN	Streaming Process
SYPRG	System Purge
START	System Startup
FSTOP	System Shutdown
CONCH	Configuration Change
CONAD	Configuration Addition
SCHCH	Schedule Change
SCHAD	Schedule Addition
SRVRG	Service Registered
SRVUN	Service Unregistered
SRVFL	Service Fail
NHCOM	North Process Complete
NHDWN	North Destination Unavailable
NHAVL	North Destination Available
UPEXC	Update Complete
BKEXC	Backup Complete
NTFDL	Notification Deleted
NTFAD	Notification Added
NTFSN	Notification Sent
NTFCL	Notification Cleared
NTFST	Notification Server Startup
NTFSD	Notification Server Shutdown
PKGIN	Package installation
PKGUP	Package updated
PKGRM	Package purged
DSPST	Dispatcher Startup
DSPSD	Dispatcher Shutdown
ESSRT	External Service Startup
ESSTP	External Service Shutdown

GET Audit Entries

GET /foglamp/audit - return a list of audit trail entries sorted with most recent first.

Request Parameters

• limit - limit the number of audit entries returned to the number specified

• skip - skip the first n entries in the audit table, used with limit to implement paged interfaces

• source - filter the audit entries to be only those from the specified source

• severity - filter the audit entries to only those of the specified severity

Response Payload

The response payload is an array of JSON objects with the audit trail entries.

Name	Type	Description	Example
timestamp	timestamp	The timestamp when the audit trail item was written.	2018-04-16 14:33:18.215
source	string	The source of the audit trail entry.	CoAP
severity	string	The severity of the event that triggered the audit trail entry to be written. This will be one of SUCCESS, FAILURE, WARNING or INFORMATION.	FAILURE
details	object	A JSON object that describes the detail of the audit trail event.	{ “message” : “Sensor readings discarded due to malformed payload” }

Example

$ curl -s http://localhost:8081/foglamp/audit?limit=2
{ "totalCount" : 24,
  "audit"      : [ { "timestamp" : "2018-02-25 18:58:07.748",
                     "source"    : "SRVRG",
                     "details"   : { "name" : "COAP" },
                     "severity"  : "INFORMATION" },
                   { "timestamp" : "2018-02-25 18:58:07.742",
                     "source"    : "SRVRG",
                     "details"   : { "name" : "HTTP_SOUTH" },
                     "severity"  : "INFORMATION" },
                   { "timestamp" : "2018-02-25 18:58:07.390",
                     "source"    : "START",
                     "details"   : {},
                     "severity"  : "INFORMATION" }
                 ]
}
$ curl -s http://localhost:8081/foglamp/audit?source=SRVUN&limit=1
{ "totalCount" : 4,
  "audit"      : [ { "timestamp" : "2018-02-25 05:22:11.053",
                     "source"    : "SRVUN",
                     "details"   : { "name": "COAP" },
                     "severity"  : "INFORMATION" }
                 ]
}
$

POST Audit Entries

POST /foglamp/audit - create a new audit trail entry.

The purpose of the create method on an audit trail entry is to allow a user interface or an application that is using the FogLAMP API to utilize the FogLAMP audit trail and notification mechanism to raise user defined audit trail entries.

Request Payload

The request payload is a JSON object with the audit trail entry minus the timestamp.

Name	Type	Description	Example
source	string	The source of the audit trail entry.	LOGGN
severity	string	The severity of the event that triggered the audit trail entry to be written. This will be one of SUCCESS, FAILURE, WARNING or INFORMATION.	FAILURE
details	object	A JSON object that describes the detail of the audit trail event.	{ “message” : “Internal System Error” }

Response Payload

The response payload is the newly created audit trail entry.

Name	Type	Description	Example
timestamp	timestamp	The timestamp when the audit trail item was written.	2018-04-16 14:33:18.215
source	string	The source of the audit trail entry.	LOGGN
severity	string	The severity of the event that triggered the audit trail entry to be written. This will be one of SUCCESS, FAILURE, WARNING or INFORMATION.	FAILURE
details	object	A JSON object that describes the detail of the audit trail event.	{ “message” : “Internal System Error” }

Example

$ curl -X POST http://localhost:8081/foglamp/audit \
-d '{ "severity": "FAILURE", "details": { "message": "Internal System Error" }, "source": "LOGGN" }'
{ "source": "LOGGN",
  "timestamp": "2018-04-17 11:49:55.480",
  "severity": "FAILURE",
  "details": { "message": "Internal System Error" }
}
$
$ curl -X GET http://localhost:8081/foglamp/audit?severity=FAILURE
{ "totalCount": 1,
  "audit": [ { "timestamp": "2018-04-16 18:32:28.427",
               "source"   :    "LOGGN",
               "details"  : { "message": "Internal System Error" },
               "severity" : "FAILURE" }
           ]
}
$

Configuration Management

Configuration management in an important aspect of the REST API, however due to the discoverable form of the configuration of FogLAMP the API itself is fairly small.

The configuration REST API interacts with the configuration manager to create, retrieve, update and delete the configuration categories and values. Specifically all updates must go via the management layer as this is used to trigger the notifications to the components that have registered interest in configuration categories. This is the means by which the dynamic reconfiguration of FogLAMP is achieved.

category

The category interface is part of the Configuration Management for FogLAMP and it is used to create, retrieve, update and delete configuration categories and items.

GET categor(ies)

GET /foglamp/category - return the list of known categories in the configuration database

Response Payload

The response payload is a JSON object with an array of JSON objects, one per valid category.

Name	Type	Description	Example
key	string	The category key, each category has a unique textual key that defines it.	network
description	string	A description of the category that may be used for display purposes.	Network Settings
displayName	string	Name of the category that may be used for display purposes.	Network Settings

Example

$ curl -X GET http://localhost:8081/foglamp/category
{
  "categories":
  [
    {
      "key": "SCHEDULER",
       "description": "Scheduler configuration",
       "displayName": "Scheduler"
    },
    {
      "key": "SMNTR",
      "description": "Service Monitor",
      "displayName": "Service Monitor"
    },
    {
      "key": "rest_api",
      "description": "FogLAMP Admin and User REST API",
      "displayName": "Admin API"
    },
    {
      "key": "service",
      "description": "FogLAMP Service",
      "displayName": "FogLAMP Service"
    },
    {
      "key": "Installation",
      "description": "Installation",
      "displayName": "Installation"
    },
    {
      "key": "General",
      "description": "General",
      "displayName": "General"
    },
    {
      "key": "Advanced",
      "description": "Advanced",
      "displayName": "Advanced"
    },
    {
      "key": "Utilities",
      "description": "Utilities",
      "displayName": "Utilities"
    }
  ]
}
$

GET category

GET /foglamp/category/{name} - return the configuration items in the given category.

Path Parameters

• name is the name of one of the categories returned from the GET /foglamp/category call.

Response Payload

The response payload is a set of configuration items within the category, each item is a JSON object with the following set of properties.

Name	Type	Description	Example
description	string	A description of the configuration item that may be used in a user interface.	The IPv4 network address of the FogLAMP server
type	string	A type that may be used by a user interface to know how to display an item.	IPv4
default	string	An optional default value for the configuration item.	127.0.0.1
displayName	string	Name of the category that may be used for display purposes.	IPv4 address
order	integer	Order at which category name will be displayed.	1
value	string	The current configured value of the configuration item. This may be empty if no value has been set.	192.168.0.27

Example

$ curl -X GET http://localhost:8081/foglamp/category/rest_api
{
  "enableHttp": {
     "description": "Enable HTTP (disable to use HTTPS)",
     "type": "boolean",
     "default": "true",
     "displayName": "Enable HTTP",
     "order": "1",
     "value": "true"
  },
  "httpPort": {
     "description": "Port to accept HTTP connections on",
     "type": "integer",
     "default": "8081",
     "displayName": "HTTP Port",
     "order": "2",
     "value": "8081"
  },
  "httpsPort": {
     "description": "Port to accept HTTPS connections on",
     "type": "integer",
     "default": "1995",
     "displayName": "HTTPS Port",
     "order": "3",
     "validity": "enableHttp==\"false\"",
     "value": "1995"
  },
  "certificateName": {
    "description": "Certificate file name",
    "type": "string",
    "default": "foglamp",
    "displayName": "Certificate Name",
    "order": "4",
    "validity": "enableHttp==\"false\"",
                      "value": "foglamp"
  },
  "authentication": {
    "description": "API Call Authentication",
    "type": "enumeration",
    "options": [
      "mandatory",
      "optional"
    ],
    "default": "optional",
    "displayName": "Authentication",
     "order": "5",
     "value": "optional"
  },
  "authMethod": {
    "description": "Authentication method",
    "type": "enumeration",
    "options": [
      "any",
      "password",
      "certificate"
    ],
    "default": "any",
    "displayName": "Authentication method",
    "order": "6",
    "value": "any"
  },
  "authCertificateName": {
    "description": "Auth Certificate name",
    "type": "string",
    "default": "ca",
    "displayName": "Auth Certificate",
    "order": "7",
    "value": "ca"
  },
  "allowPing": {
    "description": "Allow access to ping, regardless of the authentication required and authentication header",
    "type": "boolean",
    "default": "true",
    "displayName": "Allow Ping",
    "order": "8",
    "value": "true"
  },
  "passwordChange": {
    "description": "Number of days after which passwords must be changed",
    "type": "integer",
    "default": "0",
    "displayName": "Password Expiry Days",
    "order": "9",
    "value": "0"
  },
  "authProviders": {
     "description": "Authentication providers to use for the interface (JSON array object)",
     "type": "JSON",
     "default": "{\"providers\": [\"username\", \"ldap\"] }",
     "displayName": "Auth Providers",
     "order": "10",
     "value": "{\"providers\": [\"username\", \"ldap\"] }"
  }
      }
$

GET category item

GET /foglamp/category/{name}/{item} - return the configuration item in the given category.

Path Parameters

• name - the name of one of the categories returned from the GET /foglamp/category call.

• item - the item within the category to return.

Response Payload

The response payload is a configuration item within the category, each item is a JSON object with the following set of properties.

Name	Type	Description	Example
description	string	A description of the configuration item that may be used in a user interface.	The IPv4 network address of the FogLAMP server
type	string	A type that may be used by a user interface to know how to display an item.	IPv4
default	string	An optional default value for the configuration item.	127.0.0.1
displayName	string	Name of the category that may be used for display purposes.	IPv4 address
order	integer	Order at which category name will be displayed.	1
value	string	The current configured value of the configuration item. This may be empty if no value has been set.	192.168.0.27

Example

$ curl -X GET http://localhost:8081/foglamp/category/rest_api/httpsPort
{
    "description": "Port to accept HTTPS connections on",
    "type": "integer",
    "default": "1995",
    "displayName": "HTTPS Port",
    "order": "3",
    "validity": "enableHttp==\"false\"",
    "value": "1995"
}

$

PUT category item

PUT /foglamp/category/{name}/{item} - set the configuration item value in the given category.

Path Parameters

• name - the name of one of the categories returned from the GET /foglamp/category call.

• item - the the item within the category to set.

Request Payload

A JSON object with the new value to assign to the configuration item.

Name	Type	Description	Example
value	string	The new value of the configuration item.	192.168.0.27

Response Payload

The response payload is the newly updated configuration item within the category, the item is a JSON object object with the following set of properties.

Name	Type	Description	Example
description	string	A description of the configuration item that may be used in a user interface.	The IPv4 network address of the FogLAMP server
type	string	A type that may be used by a user interface to know how to display an item.	IPv4
default	string	An optional default value for the configuration item.	127.0.0.1
displayName	string	Name of the category that may be used for display purposes.	IPv4 address
order	integer	Order at which category name will be displayed.	1
value	string	The current configured value of the configuration item. This may be empty if no value has been set.	192.168.0.27

Example

$ curl -X PUT http://localhost:8081/foglamp/category/rest_api/httpsPort \
  -d '{ "value" : "1996" }'
{
  "description": "Port to accept HTTPS connections on",
  "type": "integer",
  "default": "1995",
  "displayName": "HTTPS Port",
  "order": "3",
  "validity": "enableHttp==\"false\"",
  "value": "1996"
}
$

DELETE category item

DELETE /foglamp/category/{name}/{item}/value - unset the value of the configuration item in the given category.

This will result in the value being returned to the default value if one is defined. If not the value will be blank, i.e. the value property of the JSON object will exist with an empty value.

Path Parameters

• name - the name of one of the categories returned from the GET /foglamp/category call.

• item - the the item within the category to return.

Response Payload

The response payload is the newly updated configuration item within the category, the item is a JSON object object with the following set of properties.

Name	Type	Description	Example
description	string	A description of the configuration item that may be used in a user interface.	The IPv4 network address of the FogLAMP server
type	string	A type that may be used by a user interface to know how to display an item.	IPv4
default	string	An optional default value for the configuration item.	127.0.0.1
displayName	string	Name of the category that may be used for display purposes.	IPv4 address
order	integer	Order at which category name will be displayed.	1
value	string	The current configured value of the configuration item. This may be empty if no value has been set.	127.0.0.1

Example

$ curl -X DELETE http://localhost:8081/foglamp/category/rest_api/httpsPort/value
{
  "description": "Port to accept HTTPS connections on",
  "type": "integer",
  "default": "1995",
  "displayName": "HTTPS Port",
  "order": "3",
  "validity": "enableHttp==\"false\"",
  "value": "1995"
}
$

POST category

POST /foglamp/category - creates a new category

Request Payload

A JSON object that defines the category.

Name	Type	Description	Example
key	string	The key that identifies the category. If the key already exists as a category then the contents of this request is merged with the data stored.	backup
description	string	A description of the configuration category	Backup configuration
items	list	An optional list of items to create in this category
name	string	The name of a configuration item	destination
description	string	A description of the configuration item	The destination to which the backup will be written
type	string	The type of the configuration item	string
default	string	An optional default value for the configuration item	/backup

NOTE: with list we mean a list of JSON objects in the form of { obj1,obj2,etc. }, to differ from the concept of array, i.e. [ obj1,obj2,etc. ]

Example

$ curl -X POST http://localhost:8081/foglamp/category
  -d '{ "key": "My Configuration", "description": "This is my new configuration",
      "value": { "item one": { "description": "The first item", "type": "string", "default": "one" },
                 "item two": { "description": "The second item", "type": "string", "default": "two" },
                 "item three": { "description": "The third item", "type": "string", "default": "three" } } }'
{ "description": "This is my new configuration", "key": "My Configuration", "value": {
      "item one": { "default": "one", "type": "string", "description": "The first item", "value": "one" },
      "item two": { "default": "two", "type": "string", "description": "The second item", "value": "two" },
      "item three": { "default": "three", "type": "string", "description": "The third item", "value": "three" } }
}
$

Task Management

The task management API’s allow an administrative user to monitor and control the tasks that are started by the task scheduler either from a schedule or as a result of an API request.

task

The task interface allows an administrative user to monitor and control FogLAMP tasks.

GET task

GET /foglamp/task - return the list of all known task running or completed

Request Parameters

• name - an optional task name to filter on, only executions of the particular task will be reported.

• state - an optional query parameter that will return only those tasks in the given state.

Response Payload

The response payload is a JSON object with an array of task objects.

Name	Type	Description	Example
id	string	A unique identifier for the task. This takes the form of a uuid and not a Linux process id as the ID’s must survive restarts and failovers	0a787bf3-4f48-4235-ae9a-2816f8ac76cc
name	string	The name of the task	purge
state	string	The current state of the task	Running
startTime	timestamp	The date and time the task started	2018-04-17 08:32:15.071
endTime	timestamp	The date and time the task ended This may not exist if the task is not completed.	2018-04-17 08:32:14.872
exitCode	integer	Exit Code of the task.	0
reason	string	An optional reason string that describes why the task failed.	No destination available to write backup

Example

$ curl -X GET http://localhost:8081/foglamp/task
{
"tasks": [
  {
    "id": "a9967d61-8bec-4d0b-8aa1-8b4dfb1d9855",
    "name": "stats collection",
    "processName": "stats collector",
    "state": "Complete",
    "startTime": "2020-05-28 09:21:58.650",
    "endTime": "2020-05-28 09:21:59.155",
    "exitCode": 0,
    "reason": ""
  },
  {
    "id": "7706b23c-71a4-410a-a03a-9b517dcd8c93",
    "name": "stats collection",
    "processName": "stats collector",
    "state": "Complete",
    "startTime": "2020-05-28 09:22:13.654",
    "endTime": "2020-05-28 09:22:14.160",
    "exitCode": 0,
    "reason": ""
  },
  ... ] }
$
$ curl -X GET http://localhost:8081/foglamp/task?name=purge
{
"tasks": [
  {
    "id": "c24e006d-22f2-4c52-9f3a-391a9b17b6d6",
    "name": "purge",
    "processName": "purge",
    "state": "Complete",
    "startTime": "2020-05-28 09:44:00.175",
    "endTime": "2020-05-28 09:44:13.915",
    "exitCode": 0,
    "reason": ""
  },
  {
    "id": "609f35e6-4e89-4749-ac17-841ae3ee2b31",
    "name": "purge",
    "processName": "purge",
    "state": "Complete",
    "startTime": "2020-05-28 09:44:15.165",
    "endTime": "2020-05-28 09:44:28.154",
    "exitCode": 0,
    "reason": ""
  },
... ] }
$
$ curl -X GET http://localhost:8081/foglamp/task?state=complete
{
"tasks": [
  {
    "id": "a9967d61-8bec-4d0b-8aa1-8b4dfb1d9855",
    "name": "stats collection",
    "processName": "stats collector",
    "state": "Complete",
    "startTime": "2020-05-28 09:21:58.650",
    "endTime": "2020-05-28 09:21:59.155",
    "exitCode": 0,
    "reason": ""
  },
  {
    "id": "7706b23c-71a4-410a-a03a-9b517dcd8c93",
    "name": "stats collection",
    "processName": "stats collector",
    "state": "Complete",
    "startTime": "2020-05-28 09:22:13.654",
    "endTime": "2020-05-28 09:22:14.160",
    "exitCode": 0,
    "reason": ""
  },
  ... ] }
 $

GET task latest

GET /foglamp/task/latest - return the list of most recent task execution for each name.

This call is designed to allow a monitoring interface to show when each task was last run and what the status of that task was.

Request Parameters

• name - an optional task name to filter on, only executions of the particular task will be reported.

• state - an optional query parameter that will return only those tasks in the given state.

Response Payload

The response payload is a JSON object with an array of task objects.

Name	Type	Description	Example
id	string	A unique identifier for the task. This takes the form of a uuid and not a Linux process id as the ID’s must survive restarts and failovers	0a787bf3-4f48-4235-ae9a-2816f8ac76cc
name	string	The name of the task	purge
state	string	The current state of the task	Running
startTime	timestamp	The date and time the task started	2018-04-17 08:32:15.071
endTime	timestamp	The date and time the task ended This may not exist if the task is not completed.	2018-04-17 08:32:14.872
exitCode	integer	Exit Code of the task.	0
reason	string	An optional reason string that describes why the task failed.	No destination available to write backup
pid	integer	Process ID of the task.	17481

Example

$ curl -X GET http://localhost:8081/foglamp/task/latest
{
"tasks": [
  {
    "id": "ea334d3b-8a33-4a29-845c-8be50efd44a4",
    "name": "certificate checker",
    "processName": "certificate checker",
    "state": "Complete",
    "startTime": "2020-05-28 09:35:00.009",
    "endTime": "2020-05-28 09:35:00.057",
    "exitCode": 0,
    "reason": "",
    "pid": 17481
  },
  {
    "id": "794707da-dd32-471e-8537-5d20dc0f401a",
    "name": "stats collection",
    "processName": "stats collector",
    "state": "Complete",
    "startTime": "2020-05-28 09:37:28.650",
    "endTime": "2020-05-28 09:37:29.138",
    "exitCode": 0,
    "reason": "",
    "pid": 17926
  }
  ... ] }
$
$ curl -X GET http://localhost:8081/foglamp/task/latest?name=purge
{
"tasks":  [
  {
    "id": "609f35e6-4e89-4749-ac17-841ae3ee2b31",
    "name": "purge",
    "processName": "purge",
    "state": "Complete",
    "startTime": "2020-05-28 09:44:15.165",
    "endTime": "2020-05-28 09:44:28.154",
    "exitCode": 0,
    "reason": "",
    "pid": 20914
  }
      ]
}
$

GET task by ID

GET /foglamp/task/{id} - return the task information for the given task

Path Parameters

• id - the uuid of the task whose data should be returned.

Response Payload

The response payload is a JSON object containing the task details.

Name	Type	Description	Example
id	string	A unique identifier for the task. This takes the form of a uuid and not a Linux process id as the ID’s must survive restarts and failovers	0a787bf3-4f48-4235-ae9a-2816f8ac76cc
name	string	The name of the task	purge
state	string	The current state of the task	Running
startTime	timestamp	The date and time the task started	2018-04-17 08:32:15.071
endTime	timestamp	The date and time the task ended This may not exist if the task is not completed.	2018-04-17 08:32:14.872
exitCode	integer	Exit Code of the task.	0
reason	string	An optional reason string that describes why the task failed.	No destination available to write backup

Example

$ curl -X GET http://localhost:8081/foglamp/task/ea334d3b-8a33-4a29-845c-8be50efd44a4
{
  "id": "ea334d3b-8a33-4a29-845c-8be50efd44a4",
  "name": "certificate checker",
  "processName": "certificate checker",
  "state": "Complete",
  "startTime": "2020-05-28 09:35:00.009",
  "endTime": "2020-05-28 09:35:00.057",
  "exitCode": 0,
  "reason": ""
}
$

Cancel task by ID

PUT /foglamp/task/{id}/cancel - cancel a task

Path Parameters

• id - the uuid of the task to cancel.

Response Payload

The response payload is a JSON object with the details of the cancelled task.

Name	Type	Description	Example
id	string	A unique identifier for the task. This takes the form of a uuid and not a Linux process id as the ID’s must survive restarts and failovers	0a787bf3-4f48-4235-ae9a-2816f8ac76cc
name	string	The name of the task	purge
state	string	The current state of the task	Running
startTime	timestamp	The date and time the task started	2018-04-17 08:32:15.071
endTime	timestamp	The date and time the task ended This may not exist if the task is not completed.	2018-04-17 08:32:14.872
reason	string	An optional reason string that describes why the task failed.	No destination available to write backup

Example

$ curl -X PUT http://localhost:8081/foglamp/task/ea334d3b-8a33-4a29-845c-8be50efd44a4/cancel
{"id": "ea334d3b-8a33-4a29-845c-8be50efd44a4", "message": "Task cancelled successfully"}
$

Other Administrative API calls

shutdown

The shutdown option will causes all foglamp services to be shutdown cleanly. Any data held in memory buffers within the services will be sent to the storage layer and the FogLAMP plugins will persist any state required when they restart.

$ curl -X PUT /foglamp/shutdown

Note

If an in memory storage layer is configured this will not be stored to any permanent storage and the contents of the memory storage layer will be lost.

restart

The restart option will causes all foglamp services to be shutdown cleanly and then restarted. Any data held in memory buffers within the services will be sent to the storage layer and the FogLAMP plugins will persist any state required when they restart.

$ curl -X PUT /foglamp/restart

Note

If an in memory storage layer is configured this will not be stored to any permanent storage and the contents of the memory storage layer will be lost.

ping

The ping interface gives a basic confidence check that the FogLAMP appliance is running and the API aspect of the appliance is functional. It is designed to be a simple test that can be applied by a user or by an HA monitoring system to test the liveness and responsiveness of the system.

GET ping

GET /foglamp/ping - return liveness of FogLAMP

NOTE: the GET method can be executed without authentication even when authentication is required. This behaviour is configurable via a configuration option.

Response Payload

The response payload is some basic health information in a JSON object.

Name	Type	Description	Example
uptime	numeric	Time in seconds since FogLAMP started	2113.076449394226
dataRead	numeric	A count of the number of sensor readings	1452
dataSent	numeric	A count of the number of readings sent to PI	347
dataPurged	numeric	A count of the number of readings purged	226
authenticationOptional	boolean	When true, the REST API does not require authentication. When false, users must successfully login in order to call the rest API. Default is true	true
serviceName	string	Name of service	FogLAMP
hostName	string	Name of host machine	foglamp
ipAddresses	list	IPv4 and IPv6 address of host machine	[“10.0.0.0”,”123:234:345:456:567:678:789:890”]
health	string	Health of FogLAMP services	“green”
safeMode	boolean	True if FogLAMP is started in safe mode (only core and storage services will be started)	2113.076449394226

Example

$ curl -s http://localhost:8081/foglamp/ping
{
  "uptime": 276818,
  "dataRead": 0,
  "dataSent": 0,
  "dataPurged": 0,
  "authenticationOptional": true,
  "serviceName": "FogLAMP",
  "hostName": "foglamp",
  "ipAddresses": [
    "x.x.x.x",
    "x:x:x:x:x:x:x:x"
  ],
  "health": "green",
  "safeMode": false
}
$