Writing and Using Plugins¶

A plugin has a small set of external entry points that must exist in order for FogLAMP to load and execute that plugin. Currently plugins may be written in either Python or C/C++, the set of entry points is the same for both languages. The entry points detailed here will be presented for both languages, a more in depth discussion of writing plugins in C/C++ will then follow.

General Guidance¶

Before delving into the detail of how to write plugins, what entry points have to be provided and how to build and test them, a few notes of general guidance that all plugin developers should consider that will prevent the plugin writer difficulty.

The ethos of FogLAMP is to provide data pipelines that promote easy building of applications through re-use of small, focused processing components. Always try to make use of existing plugins when at all possible. When writing new plugins do not be tempted to make them too specific to a single application. This will mean it is more likely that at some point in the future you will have all the components in your toolbox that you need to create the next application without having to write new plugins.

Filters within FogLAMP are run within a single process which may be a south or north service, they do not run as separate executable. Therefore make sure that when you write a new plugin service that you do not make use of global variables. Global variables will be shared between all the plugins in a service and may clash with other plugins and will prevent the same plugin being used multiple times within a pipeline.

Do not make assumptions about how the data you are processing in your plugin will be used, or by how many upstream components it will be used. For example do not put anything in a south plugin or a filter plugin that assumes the data will be consumed by a particular north plugin or will only be consumed by one north plugin. An example of this might be a south plugin that adds OMF AF Location hints to the data it produces. Whilst this works well if the data is sent to OMF, it does not help if the data is sent to a different destination that also requires location information. Adding options for different destinations only compounds the problem, consider for example that the data might be sent to multiple destinations. A better approach would be to add generic location meta data to the data and have the hints filters for each of the destinations perform the destination specific work.

Common FogLAMP Plugin API¶

Every plugin provides at least one common API entry point, the plugin_info entry point. It is used to obtain information about a plugin before it is initialized and used. It allows FogLAMP to determine what type of plugin it is, e.g. a South bound plugin or a North bound plugin, obtain default configuration information for the plugin and determine version information.

Plugin Information¶

The information entry point is implemented as a call, plugin_info, that takes no arguments. Data is returned from this API call as a JSON document with certain well known properties.

A typical Python implementation of this would simply return a fixed dictionary object that encodes the required properties.

def plugin_info():
    """ Returns information about the plugin.

    Args:
    Returns:
        dict: plugin information
    Raises:
    """

    return {
        'name': 'DHT11 GPIO',
        'version': '1.0',
        'mode': 'poll',
        'type': 'south',
        'interface': '1.0',
        'config': _DEFAULT_CONFIG
    }

These are the properties returned by the JSON document:

name - A textual name that will be used for reporting purposes for this plugin.
version - This property allows the version of the plugin to be communicated to the plugin loader. This is used for reporting purposes only and has no effect on the way FogLAMP interacts with the plugin.
mode - A set of options that defines how the plugin operates. Multiple values can be given, the different options are separated from each other using the | symbol.
type - The type of the plugin, used by the plugin loader to determine if the plugin is being used correctly. The type is a simple string and may be south, north, filter, rule or delivery.

Note

If you browse the FogLAMP code you may find old plugins with type device: this was the type used to indicate a South plugin and it is now deprecated.

interface - This property reports the version of the plugin API to which this plugin was written. It allows FogLAMP to support upgrades of the API whilst being able to recognise the version that a particular plugin is compliant with. Currently all interfaces are version 1.0.
configuration - This allows the plugin to return a JSON document which contains the default configuration of the plugin. This is in line with the extensible plugin mechanism of FogLAMP, each plugin will return a set of configuration items that it wishes to use, this will then be used to extend the set of FogLAMP configuration items. This structure, a JSON document, includes default values but no actual values for each configuration option. The first time FogLAMP’s configuration manager sees a category it will register the category and create values for each item using the default value in the configuration document. On subsequent calls the value already in the configuration manager will be used.
This mechanism allows the plugin to extend the set of configuration variables whilst giving the user the opportunity to modify the value of these configuration items. It also allow new versions of plugins to add new configuration items whilst retaining the values of previous items. And new items will automatically be assigned the default value for that item.
As an example, a plugin that wishes to maintain two configuration variables, say a GPIO pin to use and a polling interval, would return a configuration document that looks as follows:

{
    'pollInterval': {
        'description': 'The interval between poll calls to the device poll routine expressed in milliseconds.',
        'type': 'integer',
        'default': '1000'
    },
    'gpiopin': {
        'description': 'The GPIO pin into which the DHT11 data pin is connected',
        'type': 'integer',
        'default': '4'
    }
}

The various values that may appear in the mode item are shown in the table below

Mode	Description
poll	The plugin is a polled plugin and plugin_poll will be called periodically to obtain new values.
async	The plugin is an asynchronous plugin, plugin_poll will not be called and the plugin will be supplied with a callback function that it calls each time it has a new value to pass to the system. The plugin_register_ingest entry point will be called to register the callback with the plugin. The plugin_start call will be called once to initiate the asynchronous delivery of data.
none	This is equivalent to poll.
control	The plugin support a control flow to the device the plugin is connected to. The must supply the control entry points plugin_write and plugin_operation.

A C/C++ plugin returns the same information as a structure, this structure includes the JSON configuration document as a simple C string.

#include <plugin_api.h>

extern "C" {

/**
 * The plugin information structure
 */
static PLUGIN_INFORMATION info = {
        "MyPlugin",               // Name
        "1.0.1",                  // Version
        0,                        // Flags
        PLUGIN_TYPE_SOUTH,        // Type
        "1.0.0",                  // Interface version
        default_config            // Default configuration
};

/**
 * Return the information about this plugin
 */
PLUGIN_INFORMATION *plugin_info()
{
        return &info;
}

In the above example the constant default_config is a string that contains the JSON configuration document. In order to make the JSON easier to manage a special macro is defined in the plugin_api.h header file. This macro is called QUOTE and is designed to ease the quoting requirements to create this JSON document.

const char *default_config = QUOTE({
              "plugin" : {
                      "description" : "My example plugin in C++",
                      "type" : "string",
                      "default" : "MyPlugin",
                      "readonly" : "true"
                      },
               "asset" : {
                      "description" : "The name of the asset the plugin will produce",
                      "type" : "string",
                      "default" : "MyAsset"
                      }
});

The flags items contains a bitmask of flag values used to pass information regarding the behavior and requirements of the plugin. The flag values currently supported are shown below

Flag Name	Description
SP_COMMON	Used exclusively by storage plugins. The plugin supports the common table access needed to store configuration
SP_READINGS	Used exclusively by storage plugins. The plugin supports the storage of reading data
SP_ASYNC	The plugin is an asynchronous plugin, plugin_poll will not be called and the plugin will be supplied with a callback function that it calls each time it has a new value to pass to the system. The plugin_register_ingest entry point will be called to register the callback with the plugin. The plugin_start call will be called once to initiate the asynchronous delivery of data. This applies only to south plugins.
SP_PERSIST_DATA	The plugin wishes to persist data between executions
SP_INGEST	A non-south plugin wishes to ingest new data into the system. Used by notification plugins
SP_GET_MANAGEMENT	The plugin requires access to the management API interface for the service
SP_GET_STORAGE	The plugin requires access to the storage service
SP_DEPRECATED	The plugin should be considered to be deprecated. New service can not use this plugin, but existing services may continue to use it
SP_BUILTIN	The plugin is not implemented as an external package but is built into the system
SP_CONTROL	The plugin implement control features

These flag values may be combined by use of the or operator where more than one of the above options is supported.

Plugin Initialization¶

The plugin initialization is called after the service that has loaded the plugin has collected the plugin information and resolved the configuration of the plugin but before any other calls will be made to the plugin. The initialization routine is called with the resolved configuration of the plugin, this includes values as opposed to the defaults that were returned in the plugin_info call.

This call is used by the plugin to do any initialization or state creation it needs to do. The call returns a handle which will be passed into each subsequent call of the plugin. The handle allows the plugin to create state information that is maintained and passed to it whilst allowing for multiple instances of the same plugin to be loaded by a service if desired. It is equivalent to a this or self pointer for the plugin, although the plugin is not defined as a class. The handle is the only way in which the plugin should retain information between calls to a given entry point and also the only way information should be passed between entry points.

In Python a simple example of a sensor that reads a GPIO pin for data, we might choose to use that configured GPIO pin as the handle we pass to other calls.

def plugin_init(config):
    """ Initialise the plugin.

    Args:
        config: JSON configuration document for the device configuration category
    Returns:
        handle: JSON object to be used in future calls to the plugin
    Raises:
    """

    handle = config['gpiopin']['value']
    return handle

A C/C++ plugin should return a value in a void pointer that can then be dereferenced in subsequent calls. A typical C++ implementation might create an instance of a class and use that instance as the handle for the plugin.

/**
 * Initialise the plugin, called to get the plugin handle
 */
PLUGIN_HANDLE plugin_init(ConfigCategory *config)
{
MyPluginClass *plugin = new MyPluginClass();

        plugin->configure(config);

        return (PLUGIN_HANDLE)plugin;
}

It should also be observed in the above C/C++ example the plugin_init call is passed a pointer to a ConfigCategory class that encapsulates the JSON configuration category for the plugin. Details of the ConfigCategory class are available in the section C++ Support Classes.

Plugin Shutdown¶

The plugin shutdown method is called as part of the shutdown sequence of the service that loaded the plugin. It gives the plugin the opportunity to do any cleanup operations before terminating. As with all calls it is passed the handle of our plugin instance. Plugins can not prevent the shutdown and do not have to implement any actions. In our simple sensor example there is nothing to do in order to shutdown the plugin.

A C/C++ plugin might use this plugin_shutdown call to delete the plugin class instance it created in the corresponding plugin_init call.

/**
 * Shutdown the plugin
 */
void plugin_shutdown(PLUGIN_HANDLE *handle)
{
MyPluginClass *plugin = (MyPluginClass *)handle;

        delete plugin;
}

Plugin Reconfigure¶

The plugin reconfigure method is called whenever the configuration of the plugin is changed. It allows for the dynamic reconfiguration of the plugin whilst it is running. The method is called with the handle of the plugin and the updated configuration document. The plugin should take whatever action it needs to and return a new or updated copy of the handle that will be passed to future calls.

The plugin reconfigure method is shared between most but not all plugin types. In particular it does not exist for the shorted lived plugins that are created to perform a single operation and then terminated. These are the north plugins and the notification delivery plugins.

Using a simple Python example of our sensor reading a GPIO pin, we extract the new pin number from the new configuration data and return that as the new handle for the plugin instance.

def plugin_reconfigure(handle, new_config):
    """ Reconfigures the plugin, it should be called when the configuration of the plugin is changed during the
        operation of the device service.
        The new configuration category should be passed.

    Args:
        handle: handle returned by the plugin initialisation call
        new_config: JSON object representing the new configuration category for the category
    Returns:
        new_handle: new handle to be used in the future calls
    Raises:
    """

    new_handle = new_config['gpiopin']['value']
    return new_handle

In C/C++ the plugin_reconfigure method is very similar, note however that the plugin_reconfigure call is passed the JSON configuration category as a string and not a ConfigCategory, it is easy to parse and create the C++ class however, a name for the category must be given however.

/**
 * Reconfigure the plugin
 */
void plugin_reconfigure(PLUGIN_HANDLE *handle, string& newConfig)
{
ConfigCategory        config("newConfiguration", newConfig);
MyPluginClass         *plugin = (MyPluginClass *)*handle;

        plugin->configure(&config);
}

It should be noted that the plugin_reconfigure call may be delivered in a separate thread for a C/C++ plugin and that the plugin should implement any mutual exclusion mechanisms that are required based on the actions of the plugin_reconfigure method.

Configuration Lifecycle¶

FogLAMP has a very particular way of handling configuration, there are a number of design aims that have resulted in the configuration system within FogLAMP.

A desire to allow the plugins to define their own configuration elements.

Dynamic configuration that allows for maximum uptime during configuration changes.

A descriptive way to define the configuration such that user interfaces can be built without prior knowledge of the elements to be configured.

A common approach that will work across many different languages.

FogLAMP divides its configuration in categories. A category being a collection of configuration items. A category is also the smallest item of configuration that can be subscribed to by the code. This subscription mechanism is they way that FogLAMP facilitates dynamic reconfiguration. It allows a service to subscribe to one or more configuration categories, whenever an item within a category changes the central configuration manager will call a handler to pass the newly updated configuration category. This handler may be within a services or between services using the micro service management API that every service must support. The mechanism however is transparent to the code involved.

The configuration items within a category are JSON object, the object key is the name of the configuration item, the object itself contains data about that item. As an example, if we wanted to have a configuration item called MaxRetries that is an integer with a default value of 5, then we would configured it using the JSON object

"MaxRetries" : {
             "type" : "integer",
             "default" : "5"
             }

We have used the properties type and default to define properties of the configuration item MaxRetries. These are not the only properties that a configuration item can have, the full set of item types and properties are shown below

Types¶

The configuration items within a configuration category can each be defined as one of a set of types. The types currently supported by FogLAMP are

Type	Description
integer	An integer numeric value. The value may be positive or negative but may not contain any fractional part. The minimum and maximum properties may be used to control the limits of the values assigned to an integer.
float	A floating point numeric item. The minimum and maximum properties may be used to control the limits of the values assigned to a floating point item.
string	An alpha-numeric array of characters that may contain any printable characters. The length property can be used to constrain the maximum length of the string.
boolean	A boolean value that can be assigned the values true or false.
IPv4	An IP version 4 address.
IPv6	An IP version 6 address.
X509 certificate	An X509 certificate
password	A string that is used as a password. There is no difference between this or a string type other than user interfaces do not show this in plain text.
JSON	A JSON document. The value is checked to ensure it is a valid JSON document.
URL	A universal resource locator string. The API will check for correct URL formatting of the value.
enumeration	The item can be assigned one of a fixed set of values. These values are defined in the options property of the item.
script	A block of text that is executed as a script. The script type should be used for larger blocks of code to be executed.
code	A block of text that is executed as Python code. This is used for small snippets of Python rather than when larger scripts.
northTask	The name of a north task. The API will check that the value matches the name of an existing north task.
ACL	An access control list. The value is the string name of an access control list that has been created within FogLAMP.
list	A list of items, the items can be of type string, integer, float, enumeration or object. The type of the items within the list must all be the same, and this is defined via the items property of the list. A limit on the maximum number of entries allowed in the list can be enforced by use of the listSize property.
kvlist	A key value pair list. The key is a string value always but the value of the item in the list may be of type string, enumeration, float, integer or object. The type of the values in the kvlist is defined by the items property of the configuration item. A limit on the maximum number of entries allowed in the list can be enforced by use of the listSize property.
object	A complex configuration type with multiple elements that may be used within list and kvlist items only, it is not possible to have object type items outside of a list. Object type configuration items have a set of properties defined, each of which is itself a configuration item.

List¶

A simple list would be defined using the JSON shown below

"tags" : {
               "description" : "A set of tag names on which to operate",
               "type" : "list",
               "items" : "string",
               "default" : "[ \"speed\", \"temperature\", \"voltage\" ]",
               "order" : "4",
               "displayName" : "Labels"
          }

The returned value for such a configuration item is merely an array of strings.

[ "speed", "temperature", "voltage", "current", "status" ]

In the above example the user is able to supply any number of unconstrained strings, however if we wanted a user to choose from a set of fixed options they may use an enumeration as the type of the list rather than a string.

"tags" : {
            "description" : "A set of tag names on which to operate",
            "type" : "list",
            "items" : "enumeration",
            "options" : [ "speed", "current", "temperature", "voltage", "status", "runtime" ],
            "default" : "{ \"speed\", \"temperature\", \"voltage\" }",
            "order" : "4",
            "displayName" : "Labels"
         }

This differs from an enumeration in that the user is allowed to select more than one option from the set of options.

Lists may also be used to allow the entry of a list of numeric values, either integer or float, by setting the appropriate type for the items in a list.

"tags" : {
               "description" : "A set of factor values to use when calculating the best fit",
               "type" : "list",
               "items" : "integer",
               "default" : "[ \"1\", \"2\", \"3\" ]",
               "order" : "4",
               "displayName" : "Factors"
          }

Key/Value List¶

A key/value list is a way of storing tagged item pairs within a list. For example, to create a list of labels and expressions we can use a kvlist that stores the expressions as string values in the kvlist.

"expressions" : {
              "description" : "A set of expressions used to evaluate and label data",
              "type" : "kvlist",
              "items" : "string",
              "default" : "{\"idle\" : \"speed == 0\"}",
              "order" : "4",
              "displayName" : "Labels"
              }

The key values must be unique within a kvlist, as the data is stored as a JSON object with the key becoming the property name and the value of the property the corresponding value for the key.

A returned list with 4 entries would have a value as shown below.

{
     "idle" : "speed == 0",
     "operational" : "speed == 5000",
     "transitional" : "speed > 0 && speed < 5000",
     "overspeed" : "speed > 5000"
}

Lists of Objects¶

Object type items may be used in lists and are a mechanism to allow for list of groups of configuration items. The object list type items must specify a property called properties. The value of this is a JSON object that contains a list of configuration items that are grouped into the object.

An example use of an object list might allow for a map structure to be built for accessing a device like a PLC. The following shows the definition of a list that contains the map for a PLC.

"map": {
      "description": "A list of datapoints to read and PLC register definitions",
      "type": "list",
      "items" : "object",
      "default": "[ { \"datapoint\" : \"speed\", \"register\" : \"10\", \"width\" : \"1\", \"type\" : \"integer\"} ]",
      "order" : "3",
      "displayName" : "PLC Map",
      "properties" : {
              "datapoint" : {
                      "description" : "The name of the datapoint to create for the map entry",
                      "displayName" : "Datapoint",
                      "type" : "string",
                      "default" : "datapoint"
                      },
              "register" : {
                      "description" : "The register number to read",
                      "displayName" : "Register",
                      "type" : "integer",
                      "default" : "0"
                      },
              "width" : {
                      "description" : "Number of registers to read",
                      "displayName" : "Width",
                      "type" : "integer",
                      "maximum" : "4",
                      "default" : "1"
                      },
              "type" : {
                      "description" : "The data type to read",
                      "displayName" : "Data Type",
                      "type" : "enumeration",
                      "options" : [ "integer","float", "boolean" ],
                      "default" : "integer"
                      }
              }
      }

The value and default properties for a list of objects is returned as a JSON structure. An example of the above list with two elements in the list would be returned as follows:

[
  {
      "datapoint" : "voltage",
      "register" : "10",
      "width" : "2",
      "type" : "integer"
  },
  {
      "datapoint" : "current",
      "register" : "14",
      "width" : "4",
      "type" : "float"
  }
]

An alternative might be to use a key/value pair list, kvlist type, where the key is the name of the item to be read, the datapoint in the previous example and the value is an object that describes how to read the data from the PLC.

"map": {
      "description": "A list of datapoints to read and PLC register definitions",
      "type": "kvlist",
      "items" : "object",
      "default": "{\"speed\" : {\"register\" : \"10\", \"width\" : \"1\", \"type\" : \"integer\"}}",
      "order" : "3",
      "displayName" : "PLC Map",
      "properties" : {
              "register" : {
                      "description" : "The register number to read",
                      "displayName" : "Register",
                      "type" : "integer",
                      "default" : "0"
                      },
              "width" : {
                      "description" : "Number of registers to read",
                      "displayName" : "Width",
                      "type" : "integer",
                      "maximum" : "4",
                      "default" : "1"
                      },
              "type" : {
                      "description" : "The data type to read",
                      "displayName" : "Data Type",
                      "type" : "enumeration",
                      "options" : [ "integer","float", "boolean" ],
                      "default" : "integer"
                      }
              }
      }

The value and default properties for a list of objects is returned as a JSON structure. An example of the above list with two elements in the list, voltage and current would be returned as follows:

{
      "voltage" : {
                      "register" : "10",
                      "width" : "2",
                      "type" : "integer"
              },
      "current" : {
                      "register" : "14",
                      "width" : "4",
                      "type" : "float"
              }
}

Properties¶

Property	Description
default	The default value for the configuration item. This is always expressed as a string regardless of the type of the configuration item.
deprecated	A boolean flag to indicate that this item is no longer used and will be removed in a future release.
description	A description of the configuration item used in the user interface to give more details of the item. Commonly used as a mouse over help prompt.
displayName	The string to use in the user interface when presenting the configuration item. Generally a more user friendly form of the item name. Item names are referenced within the code.
items	The type of the items in a list or kvlist configuration item.
length	The maximum length of the string value of the item.
listSize	The maximum number of entries allowed in a list or kvlist item.
mandatory	A boolean flag to indicate that this item can not be left blank.
maximum	The maximum value for a numeric configuration item.
minimum	The minimum value for a numeric configuration item.
options	Only used for enumeration type elements. This is a JSON array of string that contains the options in the enumeration.
order	Used in the user interface to give an indication of how high up in the dialogue to place this item.
group	Used to group related items together. The main use of this is within the GUI which will turn each group into a tab in the creation and edit screens.
readonly	A boolean property that can be used to include items that can not be altered by the API.
rule	A validation rule that will be run against the value. This must evaluate to true for the new value to be accepted by the API
type	The type of the configuration item. The list of types supported are; integer, float, string, password, enumeration, boolean, JSON, URL, IPV4, IPV6, script, code, X509 certificate and northTask.
validity	An expression used to determine if the configuration item is valid. Used in the UI to gray out one value based on the value of others.
value	The current value of the configuration item. This is not included when defining a set of default configuration in, for example, a plugin.
properties	A set of items that are used in list and kvlist type items to create a list of groups of configuration items.
permissions	An array of user roles that are allowed to update this configuration item. If not given then the configuration item can be updated by any user. If the permissions property is included in a configuration item the array must have at least one entry.

Of the above properties of a configuration item type, default and description are mandatory, all others are optional.

Note

It is strongly advised to include a displayName and an order in every item to improve the GUI rendering of configuration screens. If a configuration category is very large it is also recommended to use the group property to group together related items. These grouped items are displayed within separate tabs in the current FogLAMP GUI.

Management¶

Configuration data is stored by the storage service and is maintained by the configuration in the core FogLAMP service. When code requires configuration it would create a configuration category with a set of items as a JSON document. It would then register that configuration category with the configuration manager. The configuration manager is responsible for storing the data in the storage layer, as it does this it first checks to see if there is already a configuration category from a previous execution of the code. If one does exist then the two are merged, this merging process allows updates to the software to extend the configuration category whilst maintaining any changes in values made by the user.

Dynamic reconfiguration within FogLAMP code is supported by allowing code to subscribe for changes in a configuration category. The services that load plugin will automatically register for the plugin configuration category and when changes are seen will call the plugin_reconfigure entry point of the plugin with the new configuration. This allows the plugins to receive the updated configuration and take what actions it must in order to honour the changes to configuration. This allows for configuration to be changed without the need to stop and restart the services, however some plugins may need to close connections and reopen them, which may cause a slight interruption in the process of gathering data. That choice is up to the developers of the individual plugins.

Discovery¶

It is possible using this system to do a limited amount of discovery and tailoring of plugin configuration. A typical case when discovery might be used is to discover devices on a network that can be monitored. This can be achieved by putting the discovery code in the plugin_info entry point and having that discovery code alter the default configuration that is returned as part of the plugin information structure.

Any example of this might be to have an enumeration in the configuration that enumerates the devices to be monitored. The discovery code would then populate the enumerations options item with the various devices it discovered when the plugin_info call was made.

An example of the plugin_info entry point that does this might be as follows

/**
 * Return the information about this plugin
 */
PLUGIN_INFORMATION *plugin_info()
{
DeviceDiscovery discover;

        char *config = discover.discover(default_config, "discovered");
        info.config = config;
        return &info;
}

The configuration in default_config is assumed to have an enumeration item called discovered

"discovered" : {
        "description" : "The discovered devices, select 'Manual' to manually enter an IP address",
        "type" : "enumeration",
        "options" : [ "Manual" ],
        "default" : "Manual",
        "displayName": "Devices",
        "mandatory": "true",
        "order" : "2"
        },
"IP" : {
        "description" : "The IP address of your device, used to add a device that could not be discovered",
        "type" : "string",
        "default" : "127.0.0.1",
        "displayName": "IP Address",
        "mandatory": "true",
        "order" : "3",
        "validity" : "discovered == \"Manual\""
        },

Note the use of the Manual option to allow entry of devices that could not be discovered.

The discover method does the actually discovery and manipulates the JSON configuration to add the options element of the configuration item.

The code that connects to the device should then look at the discovered configuration item, if it finds it set to Manual then it will get an IP address from the IP configuration item. Otherwise it uses the information in the discovered item to connect, note that this need not just be an IP address, you can format the data in a way that is more user friendly and have the connection code extract what it needs or create a table in the discover method to allow for user meaningful strings to be mapped to network addresses.

The example here was written in C++, there is nothing that is specific to C++ however and the same approach can be taken in Python.

One thing to note however, the plugin_info call is used in the display of available plugins, discovery code that is very slow will impact the performance of plugin selection.

Writing Audit Trail¶

Plugins are able to write records to the audit trail. These records must use one of the predefined audit code that are support by the system. See Audit Trail for details of the supported audit codes within the system.

In C++ you use the AuditLogger class to write these audit trail entries, this is a singleton object that is access via the getLogger method.

AuditLogger *audit = AuditLogger::getLogger();
audit->audit("NHDWN", "INFORMATION");

There is also a convenience function that can be used if you not want to define a local pointer the AuditLogger

AuditLogger::auditLog("NHAVL", "INFORMATION");

Permissions¶

The permissions property is used to control the update of configuration items within a category. If FogLAMP has been configured such that it requires authentication in order to connect to the REST API, or by extension the FogLAMP GUI, then when a user attempts to update a category which contains an item with the permissions property set, the user role will be fetched and compared to the list of roles able to update the item. Items within the category that do not have the permissions property will not be affected.

The REST API category is an example of using the permissions property to restrict the items in the category that non-admin role users can change. Below we show one of the configuration items that is restricted, the one that controls the requirement to authenticate when connecting to FogLAMP.

"authentication": {
  "description": "API Call Authentication",
  "type": "enumeration",
  "options": [
    "mandatory",
    "optional"
  ],
  "default": "optional",
  "displayName": "Authentication",
  "order": "5",
  "permissions": [
    "admin"
  ],
  "value": "optional"
}

The use of the permissions property with the single role of admin means that only admin users can change this setting. If we wished to allow more than admin users we can add another role. For example

"logLevel": {
    "description": "Minimum logging level reported for Core server",
    "type": "enumeration",
    "displayName": "Minimum Log Level",
    "options": ["debug", "info", "warning", "error", "critical"],
    "default": "warning",
    "order": "1",
    "permissions": ["admin", "control"]
}

In this case users with the role admin or control are allowed to alter the configuration item.

Note

User created with the role of view configuration or view data are unable to alter any configuration items regardless of the permissions properties on those items.